Click image to view full size image
Wood Glue For Finger Joint
Product Type: FBWG36M (similar HENKEL AQUENCE 3366M formulation).
Product Description:
FMWG36M is a kind of D3 wood adhesive, with very strong initial adhesion, high final bonding strength and well water-resistance.
Features and Advantages:
Appearance: light yellow liquid
Viscosity(BF RVF 5#/10rpm/27ºC): 16000cps
Solid content: 51%
Density: 1.1
PH: 2.5
Superior initial bonding strength and final bonding strength
Fast drying
Water resistance
Environment friendly
All raw materials are accorded with FDA rule 21CFR175.105 "adhesive"
Application:
The product is applied to flooring, finger joint, joggle joint and jointing, veneering composite(cold pressing and hot pressing), veneer laminating, hard plastic laminating (cold pressing and high frequency heating pressing), bonding of wood door and hollow-cored door, bonding of different sandwich materials.
Using Guide:
This product can be coated directly, adapt to roller coating, extruding process and other coating.
It is suggested to operate at the temperature over 20ºC so as to reach better bonding performance.
NOTICE:
DO NOT mix with other adhesives.
The vessel should be covered well and tightly to avoid the surface of glue to be dry and contaminated.
Suggest to recycle use according to first production date first use.
Storage and Shelf life:
Store at dry and shade place, temperature over 6ºC.
Guaranteed Shelf life: 6 months.
It is available to be used after passing test qualified even over its shelf life. Usually one year is no problem.
Product Type: FBWG36M (similar HENKEL AQUENCE 3366M formulation).
Product Description:
FMWG36M is a kind of D3 wood adhesive, with very strong initial adhesion, high final bonding strength and well water-resistance.
Features and Advantages:
Appearance: light yellow liquid
Viscosity(BF RVF 5#/10rpm/27ºC): 16000cps
Solid content: 51%
Density: 1.1
PH: 2.5
Superior initial bonding strength and final bonding strength
Fast drying
Water resistance
Environment friendly
All raw materials are accorded with FDA rule 21CFR175.105 "adhesive"
Application:
The product is applied to flooring, finger joint, joggle joint and jointing, veneering composite(cold pressing and hot pressing), veneer laminating, hard plastic laminating (cold pressing and high frequency heating pressing), bonding of wood door and hollow-cored door, bonding of different sandwich materials.
Using Guide:
This product can be coated directly, adapt to roller coating, extruding process and other coating.
It is suggested to operate at the temperature over 20ºC so as to reach better bonding performance.
NOTICE:
DO NOT mix with other adhesives.
The vessel should be covered well and tightly to avoid the surface of glue to be dry and contaminated.
Suggest to recycle use according to first production date first use.
Storage and Shelf life:
Store at dry and shade place, temperature over 6ºC.
Guaranteed Shelf life: 6 months.
It is available to be used after passing test qualified even over its shelf life. Usually one year is no problem.